CSK Machine Screws
Angled under the head, these metric screws fit in countersunk holes and sit flush with the surface of your part. Length is measured from the top of the head.
Angled under the head, these metric screws fit in countersunk holes and sit flush with the surface of your part. Length is measured from the top of the head.
Zinc-plated screws have a layer of zinc that protects the steel from rust in wet environments and extends the life of the screw.
DIN 925 and ISO 2009 (formerly DIN 963) screws meet international standards for fastener dimensions. ISO 2009 and DIN 963 are functionally equivalent with slight differences in head height, diameter, and thread length.
Filter by Paramters
Showing 1-9 of 9 products.
| P.Code | L-Length mm |
Thread mm |
Thread Pitch mm |
H-Head mm |
T-Head Length mm |
W-Width mm |
|---|---|---|---|---|---|---|
| 15001 | 6 | 3mm M3 | 0.5 | 5.6 | 1.65 | 3 |
| 15003 | 15 | 3mm M3 | 0.5 | 5.6 | 1.65 | 3 |
| 15007 | 10 | 3mm M3 | 0.5 | 5.6 | 1.65 | 3 |
| 15198 | 10 | 4mm M4 | 0.7 | 7.8 | 2.5 | 4 |
| 15199 | 20 | 4mm M4 | 0.7 | 7.8 | 2.5 | 4 |
| 15200 | 10 | 5mm M5 | 0.8 | 9 | 3 | 5 |
| 15201 | 20 | 5mm M5 | 0.8 | 9 | 3 | 5 |
| 15202 | 10 | 6mm M6 | 1.0 | 11 | 4 | 6 |
| 15203 | 20 | 6mm M6 | 1.0 | 11 | 4 | 6 |
